NEW! Program your MINDS-I kit with the Arduino, a micro controller based on the Atmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, and ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

• Dimensions: 2.7 x 2.1 x .5 in (69 x 53 x 13mm) The USB connector and power jack extend beyond the former dimension.

• Summary:
• Microcontroller ATmega328 Operating Voltage 5V
• Input Voltage (recommended) 7-12V; Input Voltage (limits) 6-20V
• Digital I/O Pins 14 (of which 6 provide PWM output)
• Analog Input Pins 6
• DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA
• Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
• SRAM 2 KB (ATmega328)
• EEPROM 1 KB (ATmega328)
• Clock Speed 16 MHz

Plug the Sensor Shield on the top of your Arduino to make it easy to connect your digital and analog sensors, ESC, Servos, and ultrasonic sensors. This is great for use in the classroom. Breaks out the 13 digital ports and 6 analog ports to easy to connect Voltage, Ground, and Signal. The shield also includes I2C and Serial connectors.

• Dimensions: 2.7 x 2.2 x .75 in (69 x 56 x 20mm)


Includes:
• Arduino
• Sensor Shield V5
• USB cable
• Mounting plate
• Protective Cover
• Arduino Referance Guide
• All necissary hardware

Works with: (Available for Purchase Separately)
• 4X4 Robot 3-in-1 Kit (CKE-TR04-001)
• 2-in-1 Super Rover Kit (CKE-AV06-002)
Sensors:
• Parallax Ping (EMC-US01-001
• IR Distance Sensor (EMC-YD02-001)
• QTI (Infared) (EMC-PLX1-001)
• Compass Module (EMC-PLX2-001)